How to Troubleshoot Car Oil Wastes

Important things that should not be ignored by motorists before operating the car is doing the inspection engine oil. This is important because if it turns out that the consumption of oil is increasing, it is one of the benchmarks to know the symptoms of damage to the machine.

If you are a person who is sensitive in measuring the amount of engine oil needs, then the symptoms of damage that may be experienced by your vehicle can be immediately known. The actual condition of the oil can be known only by pulling the measuring stick oil. If the position of the oil are in sign L or even invisible means you should immediately add oil until the maximum limit of the amount of oil required are marked with the letter F.

If the addition of the necessary engine oil is relatively low and in quite a long period of time is still reasonable but if up to about 1 liter a month or even more then you ought to be suspicious. The oil consumption increased drastically could be a harbinger of the onset of symptoms or damage to your car's engine.

The exterior of the engine is the location of the most prone to easy your review. In this section you can check the exhaust vent air is perhaps less toned, the gasket is damaged, or the stopper block machines that are already weakened. If left to the third it can cause leakage of oil or oil dripping constantly.

To investigate the origin of the source of the oil that drips can be done by way of rolling out a sheet of newspaper under the machine during the night away. Once you know the source of the new oil droplets you can find out the location of the source of the leaks also should be immediately corrected.

If things have been outlined above is not found but still extravagant oil then need to look for the root of the problem again, it could be a type of oil use less nice and suitable for example dilute the oil. Dilute the oil type is indeed easier to flow than the kind of oil that overcome enough so as to make the liquid oil easy out upon touching the gaskets or other crevices
Share This :

How to Care For Your New Car

New cars typically require treatment more closely and more carefully than the old car. Can I buy a new car and it has certainly delighted that feels. But remember don't because you are too happy, so you fall asleep and forget the problems of her treatment. Although new cars don't need treatment too often like an old car, but it would be nice if you know of any things so that you’re new car be durable and well maintained.

Replacement oil regularly scheduled and is extremely important means for the condition of the machine. First oil replacement is usually faster than the next replacement. To do the replacement of the fuel oil it is recommended following the rules of existing raw standard in the oil and the most important and noteworthy to mention not to late change oil because it can be fatal for the condition of the machine. Typically each brand has displacement standard oil.

For the fuel consumption to note that is never use fuel. Crappy quality fuel can damage the engine, to make sure that the fuel you use pure without any mixture of other substances that quality is less good. Buy pure fuel without any mix and try to buy at the gas station that officially don't buy in a retail venue unless forced to because it run out of gas on the road away from the gas station.

Then to note again is the water in the radiator, the radiator should be filled with water which is really awake clean mineral water such as in packaging. Never fill the radiator with dirty river water even using well water or water pump is also less good because sometimes the water still contains large deposits of impurities. If using dirty water then dirt will settle and clog cooling channels so that maximum cooling becomes less as a result of the engine so fast heat.

Take the time to read the manual operation of the car so that you understand more about your new car is just as important as that which is about how to drive the vehicles, new car must operate with a regular speed. Drive a new car should also pay attention to the skill and accuracy and prudence driving conditions at the time the car was new since it will have an effect on the condition of the car.
Share This :

How to overcome Distractions on the ignition system

Indications interference in the ignition system car engine starts with the engine sound limp and difficult life. The inspection is usually done to address it on the distributor CAP or replacement of some components such as spark plug ignition (spark plugs), high-voltage wires, coil and the condenser.

The CAP distributor can have cracks, there's a crust or dew can cause short connection to the car body. Terminal on the distributor CAP can be destroyed by fire, and there is spark plug wiring hole in the dirt. These problems can cause interference on the ignition system.

Spark plug type and electrode distances used must be checked periodically. The effect of the use of an inappropriate spark plug may cause excessive heat which made lubrication up. In addition the electrode plugs will be damaged or broken insulation. Spark plug replacement is usually done after drove car 10,000-15,000 km. The installation needs to be careful not too tight so that the house is not worn or damaged plugs. Use your hands to make a new entry and then put the key to tighten.

Platinum or circuit breaker which is an important part of the series of ignition system can be problematic, for example because of changes the distance gap Platinum. Distance shrinks because platinum liming resulted in ignition occur early. Platinum inspection should be done by routine and measurement of crack Platinum right using Dwell Angel-meters.

After checking or replacing spark plugs and platinum, are usually passed on by checking or replacing the condenser and coils as well as checking the high-voltage cables.
Share This :

Blog Archive

Recent Posts