How to Take Care of the Tires In Order To Travel Smoothly

Such a long journey at the time of the vacation surely requires the performance of a vehicle. One of the noteworthy is the ban, since this is the only part of the car parts directly in contact with the road. Because if the ban in conditions less well could cause disruption of the smooth your travel.

Each tire has a safe pressure standard. Before travelling a long way try to pressure the tires really fit. Tires are less wind will easily broke the moment spurred in high speed.While the pressure is too high can cause a skid due to the pressure of the asphalt to be reduced. Moreover, if the temperature is very hot asphalt and tire life of the elderly.

Inspection of pressure can be done while the condition of the tires is cold before the journey begins. The heat caused by friction with the streets makes air expand until the pressure becomes. If the spare tire is placed near the engine check the pressure before becoming a hot engine.

Note the shape of the tire if a former foothold in the asphalt convex means excessive wind pressure. Conversely, if a concave shape means less wind pressure.To check it out, put the tire on the floor of the flat. From the observation of former Palm ban can also detect the presence of abnormality of suspension or steering mechanism. If the shape of the tire tilted scraping means not normal, normal is eroded evenly fireworks.

Also check the valve part, who knows no wind to smooth out or leak. How simple it is to incorporate or applying soapy water at the mouth of the nipple. If air bubbles arise, means there is a leak. Do not underestimate any small bubbles to anticipate things that are not desirable.

After that check the tire wheels pedestal. If there is a dent in the side of the rim or the pins against the ban can result in insufficient rubber tires out. Check also the side next to it, if there is a cracked should just replace with new tires. Check also the cracks probably tire graining there is gravel that tucked. If it turns out there are, remove them by prying with a screwdriver.

Read More

The use of Tires is good and true

The ban is part of the vehicle that is directly related to the road surface, and the function of the ban is to acquire a strong grip against the road surface. The goal that is so that the energy generated by the machine can be used as fully as possible in the spur of the vehicle. With the tires so riders would feel comfortable in the drive, because the tire is useful also to drown out surprises caused by uneven road surface.

Tires can be grouped based on the amount of air to be pumped into the tire. This classification among others was a high-pressure tire, tire pressure is low, and the extra pressure is low. Preferably the amount of air pumped into the tire must be in accordance with the advice of the tire manufacturer. This is done so that the wearing of tires become durable and security factors drive is assured.

To ban outside consists of parts, among others, the sole tire (tread) are directly related to the road surface. Tread is made of rubber that is quite strong and supple. Various forms of tread made an assortment of appropriate goals and purpose of use of the tire. Tread tires for front wheels of motorcycles usually form and model different from the tread to the rear wheels, this is exclusively for the use of ban on motorcycles. But a difference tread tires front and rear tire is not absolute, as there are several brands of tires are manufactured with the same tread shape between front and rear wheels.

Tires must have a strong frame and hold it will be resistant to high pressure, surprises and changes of load of the vehicle. Order ban is called a carcass made of layers of nylon. Nylon layer construction usually made crisscrossed crossed. Then the carcass is coated rubber resistant to heat caused by friction tread with the road surface. The large number of layers of nylon is typically noted on the outside of the tires in question. Then in order for the ban to be strong and stable on the tires rims are then equipped with a bead made of strong wire and rubber coated hard enough.

Type of tires there are equipped with inner tube and there are also tires which do not require tubes commonly referred to with the term tubeless tires. Specific to tires made of rubber in the pure power and has a high elastic and resistant to heat.

Wind pressure or tightening the tires must comply with the tire size and usage; this will affect the control of the vehicle when the vehicle is travelling. If tires are too hard or too high air pressure will usually speed up the tire wear and will cause the middle part fast tires bald and easy vehicle skid. Conversely, if the tire is too soft or the air pressure is too low, in addition to the wear that occurs on the side of the tread, but also will cause excessive heat in the tires rubbing against her due to tread with the road surface.

Read More

How to Set Up the Car at the Time of Rainy Season

To face the rainy season there are some things that should be noticed by the owners of the cars will be driving their vehicles, among other things:

1. The condition of the rubber windscreen wiper

Rubber windscreen wiper that does not function properly will certainly be very troublesome driver in the rainy season. Note the side rubber in tangent with the glass, when the invisible shiny means must be immediately replaced with a new one. One way you can help is by removing the rubber and the inside rubber rubbed on tires. The result would certainly be better than before.

2. Electrical System

The parts that are prone to water are the electrical system, specifically on the distributor, coil and spark plug wires. The voltage can be generated from the electrical system reaches 20,000 volts. Among those components that are most prone is the distributor. Produced water from condensation that occurs at the distributor CAP will cause the Division of power lines to each cylinder to be fucked. Note the circular rubber between the distributors Cap with the distributor itself is still in good condition. If it's already a stiff rubber should quickly be replaced with a new one.

A new output is already on the car lots that use CDI so safer to face the rainy season. There is rubber on CDI not fast is broken because it is not often opened the lid of its distributors to clear or set the Platinum. However we still need to be more careful with the cars because of the location of the distributor position equal to or higher than a carburetor. On the old machine, cars are often aggregated, or crashing more caused by the short circuit (shorted). Otherwise on a new car, broke down due to water hammer. Water hammer will cause damage to the combustion chamber system, and more fatal again to continue in the bent valve, piston cavities, even a pressure valve (arm) broken.

3. The height of the water

Height of water which can be skipped should not exceed height of car tires, because the average location of the distributor is the same height as car tires. Another case with car output in an 85-to the top of the layout of the distributor, coil and spark plugs located higher than the ban is even higher than the cap on the radiator. The car will continue to advance unless the water's been sucked into the combustion chamber.

When the car broke down in the flood area, you should not continue to incite the car's engine as it will result in a current battery soon empty. If this is done and thus would further aggravate the situation. Thing to do is dress it up so the car in the push to a higher place.

Use a tissue, handkerchiefs, or newspaper to dry the area around the machine. Open the distributor and pat dry when there is water in it. When having instigated yet can also live, use a match to heat the inside of the distributor. In this way the distributor CAP is expected to be dry. On the lid there is some point distributors to share high-voltage current to the spark plugs. The water in it will lead to the Division of flow to each spark plug be screwed.

And remember, after coming out of the puddles do not immediately step on the gas because of the water that goes into the drum brakes can make the brakes do not work optimally. Use first gear, stepped on the gas in conjunction with the brakes. Run a few moments until the brakes back functioning normally.

In the rainy season the car will certainly dirty, because it's wash your car as soon as possible. After net open all the doors and the car and basking in the hot sun until all the water is left in the car evaporate. The remains of the water do not dry, let alone containing salt is very dangerous to the body of the car because the car's license plate is easily corroded.

Wash the areas around tire, for there lays the dirt still slips. Make sure all parts are free from sand cars-sand smooth the hidden in between the car body plate. When this is allowed so just then dirt, mud and soil will continue to stick to and ultimately will make the car body rusting and porous.

Read More

How to Change Sokbreker

Sokbreker or shock absorbers are is a very important part on your car, because it relates to the comfort of your car while driving. If shock absorbers are already less than optimal and feels stiff or less palatable means it's time to be replaced. You do not need to worry because you can actually change it yourself even though it is located somewhat complicated under the dome.

To do the replacement of the sokbreker, you just need complete equipment such as the Jack jack-equipped stand, lock wheels and wrenches or 17 millimeter-sized ring. If all the equipment was ready the following simple way to replace sokbreker your car.

First spray a liquid penetran on nuts sokbreker. Wait a few moments to sink in. Open the fastener nut sokbreker contained in the upper part by using key ring/fitting size 17 mm. Remove the fastener nut sokbreker contained at the bottom by using the same key ring.

After the second nut, disconnect the sokbreker next to the side to get out. To do so, use the minus screwdriver or tip of a wheel lock. Sokbreker Pull out, if droop can while shake or dragged and then release.

After it was clear the sokbreker holder by means of sprayed using liquid penetrant, then install the new sokbreker the opposite way of how to open it.

Read More