How to Clean the Inside of the Car

If the inside of your car so dirty of course it feels awful to drive a car. Especially if you are carrying a relationship, friends or even your boyfriend. By reason of that's so not going anything like that then you must be diligent in cleaning the car. However, if you do not want to bother then you can use the services of a salon car to clean it.

In fact the job of cleaning up the inside of the car is not too difficult as you think, as long as the equipment is complete or available. Some of the equipment you need is a brush, cleaning tools, a chamois cloth and wet vacuum cleaning. All the equipment that you should prepare before doing the work.

After all the equipment is prepared, the first thing you should do is Park your car in the shade for example garage. Off the upholstery of your car carefully, as for the ceiling, console box and the dashboard doesn't need to be removed. Besides the carpet of the car also needs to be removed until the deck underneath is visible. Then remove the interior of your car.

After the interior of your car is issued, it is sucked up in advance with a vacuum cleaner to clean the dust, sand and dirt-other shit. Brush ceiling as well as front and rear seat using the foam from the mixture of water and cleanser. After completion brushed, hastily wiped down with a chamois cloth and then sucked up with wet vacuum cleaning.

For the interior parts using plastic material, it is brushed with a liquid cleanser. Once it can be wiped until dry and then coated with a protective fluid so durable and clean. As for car carpet cleaning it almost the same way lined with ceiling or how to clean upholstery.

After the wash, ceiling and car seats should be dried with aerated to avoid damp. After everything is dry then car seats you can immediately be installed again. Likewise with carpets and other parts, could soon be fitted again. Well, finish the job of cleaning up the inside of your car is now part in your car turns into a clean, comfortable and pleasant fragrance.

Read More

Service and general maintenance for cars

In order for the condition of the car remains the Prime engine servicing every 20,000 KM is generally done for treatment. If a car's engine too long not serviced the machine usually feels less tasty and underpowered when ridden. Regular services usually are often called engine adjustment, anything that needs to be done to take care of the car on a regular basis are as follows:

1. The work of the clean up and reset certain parts such as the petrol filter. Petrol filters need to be cleaned of impurities so that the machine is not a trembling voice. After that remove the petrol filter, then blow and beats repeatedly until clean.

2. Air Filter also needs to be cleaned because of a dirty air filter will affect the magnitude of the air required for the combustion of gasoline. More importantly, keep the air filter from dust and do screw regulator resetting your mix on Carburetors.

3. Close the distributor also need to be cleaned, clean the distributor Cap section at the point of the divisor to the spark plug-plugs that experienced erosion. If there are parts that are cracked, replace it by a new distributor Cap.

4. Check the condition of the spark plug if it still works properly or is damaged. Faulty spark plugs will cause the machine can not work normally so that the machine be limping.

5. Platinum is a very important element in the ignition system. Platinum that changes its slot distances become smaller due to liming will make ignition becomes earlier. And vice versa if its slot the ignition would make too big too fast. Crack Platinum is 45 mm.

6. Also note the setting selector octane, if there are errors this would make the ignition timing is not right. To create the proper ignition, note on the octane voters there are three lines. Just turn up on the center line, loosen the bolts fastening the distributor and then start the engine. Twisting distributor, note the flight timing which indicates the degree of ignition in accordance with the crank shaft pulley.

Read More

How to care for a Starter Car Life easily

To turn on the car there is one component that plays an important role, namely the motor starter. This component serves to rotate the engine to life. One end associated with the head of the battery positive (+) and the other end associated with the flywheel.

The task of the starter motor is generating power to rotate the crankshaft or it could be said that the starter motor is used to convert electrical energy into a round, i.e. turning the flywheel via the starter motor pinion gear. While the electrical energy that flows from the battery to the starter motor was greatly aided by the solenoid switch that is set by the ignition key.

For the latest exodus cars generally use a light engine so that any starter motor tasks is not too heavy so be durable as a starter motor age so long because only a few times in a day is used to turn on the machine.

However given the primary task of the motor starter is deciding whether a vehicle's engine to life by converting electricity into energy, surely this component also has the limitations of age and could be damaged.

In order for the motor starter durable noteworthy IE never tried turning the key contacts again when the machine alive or already live. When the car engine is already living the flywheel spins to move the crankshaft. At a time when spinning it, then there may be a starter pinion gear goes back into the teeth of the flywheel. This is often done when then starter pinion gears can cause will be destroyed.

Motor starter used over and over again can cause wear and tear on some of the components contained in the starter motor. These components include:

1. Cool booster (often called charcoal), when worn immediately replaced

2. Starter motor Parts made of copper and ends in contact directly with the flywheel, if worn out replaced immediately

3. The starter pinion Gear, at the moment of ignition is connected, which is equipped like this clutch will forward to drive a flywheel. These teeth can also be gradually damaged especially if frequent contacts when turning the key car engine being live

4. Switch the starter located at the head of the motor starter. Given the electric current flowing into the motor through the switch it so great then the existing copper in it can also be worn out

5. Lead connector between the rotor and the booster cool melt due to the heat too high. This can be caused by a weak battery, while turning the key business contacts remained forced continuously so that eventually will cause a high heat on cool booster with rotor

In the event of damage to the starter motor components, to improve it could do on its own because it is not too complicated. To release the motor starter, beginning with removing the negative cable from the battery. This is done to prevent the occurrence of short circuit while we work.

After that unplug the cable from the starter motor is preceded by releasing the cables on the terminal 30 contained in the head of the motor starter, then release the connecting cable to the terminal 50 of the starter motor head. Be careful when releasing this because the cable could break up. Once the cables are successfully released and loosen the fastening bolts and then the starter motor is issued.

For some types of vehicles, it is sometimes a little difficult to let go of the starter motor because it hindered by the exhaust manifold. This could be addressed by opening the bottom cover of the engine first and then wiring the motor starter is released. Thus the release and also the installation back motor must be carried out from under the vehicle using the key sock.

When the installation is complete, return the motor starter check again whether the starter motor can function well with how to turn on the machine. Make sure the engine spinning when the contact key rotated to start position. Beside that, on a rotating machine at the time and also at the moment of ignition disconnected from motor starter note is there any abnormal sound coming out of the motor starter.

Read More