The motor feet are everything there is on the bottom of the motor like the spokes and tires of the motor. The second part is of course very influential towards the running of the motor. You certainly know that if the tires deflated or motor his fingers is not stable, and then motor-became less comfortable to drive. That's why it's good to know your motor feet before going on something when ridden.
The legs of the motor should be firm, not to shake. Check the RADIUS alloy wheels, if the rods out and sagging then it should reset because this is the cause of the vibration when reaching. Check also the radius of the tire, set it to bearer, and bring artisan set RADIUS.
So too with alloy wheels, feel when ridden. If the current slowly feels capsizes it means his dented rims. Or when the motor in standards and when the wheels rotated sighted shake, it's a sign that rim and toes need to be reset. Swing arm shaft also pore over, this section should also be sturdy due to this section serve as joints.
Check the condition of the rubber tires grip or flower. If felt was already balding or bald, should immediately be replaced. Select the Groove tires that can handle dry or wet tracks. In addition, wind pressure must also be adjusted to the manufacturer's recommendations.
