How to fix scratches and Beret on vehicles

Scratches and Beret is the most common damage on the vehicle. Although not dangerous to riders, but surely this beret scratches and will interfere with the appearance of your vehicle. Actually, to repair the damage that this one is pretty easy. Just to give a little time, you can fix it yourself.

Usually scratches and not to disturb the beret metal or metal on your vehicle to get to know how deep scratches, we can check it out by way of fingering the scratches with a finger. When your nails are not to get into scrapes, scratches included.

To resolve it, you simply rub the part that is scraped with a mixture of polisher and a clean washcloth. Rub gently until the stroke was not seen again.

If it turns out that there are scratches on the vehicle You deep enough until your nails feel goes into it, then you can handle it in a way that scratched part washing with detergent foam. Then rinse until clean, and then dry it with a clean Duster. Once cleaned, the part rubs oil solvent to remove the remnants of dirt on the metal.

After the cleaning process is completed, sandpaper parts scratched with sandpaper paper size of 400 or 500. That section is slowly rubbing heads with moistened with detergent foam until the scratches look no further, as well as no sharp edge between metal and meni or between meni and paint.

Then dampen the part that has been sanded it with alcohol. Then, paint the back section by using a small brush and smooth.