Always prepare your impromptu needs Vespa as key, sandpaper, isolation and sealer. If Your Vespa suddenly broke down in the middle of the journey, the first ledge was securing the position of the motor you. Then open the right side body cover, check which parts are damaged. The strike could be caused because of long life or its material undergoes wear and tear. The strike could also be caused due to the water that seeped into the device so that the process of burning fireplaces so distracted.
If it turns out the head spark plug broke, probably caused by the effects of heat caused by the spark plug, the following steps need to be performed:
1. Open the head cover plugs from the spark plug.
2. Let sealer on the part that cracked, wait a few moments until dry.
3. While waiting for the dry, check the rubber cable protector plugs, If possible, brush using liquid seals do similar and equally. Let stand a few minutes until it dries.
4. Check the cable connection between the coil section and head of the spark plug cover. Make sure parts of it are well protected.
5. If the look naked, you can layer it with a sealer to evenly.
6. Clean the spark plug and the crust, if wet rag until dry.
7. Attach the spark plug back to its original place.
8. If it is dry, wrap with insulation on a part that's been given a sealer so that there are no loopholes that could make water seep into the spaces of this ignition devices.
9. Finally, connect the spark plug wires again with his head, and then plug in the spark plug.