To ban outside consists of parts, among others, the sole tire (tread) are directly related to the road surface. Tread is made of rubber that is quite strong and supple. Various forms of tread made an assortment of appropriate goals and purpose of use of the tire. Tread tires for front wheels of motorcycles usually form and model different from the tread to the rear wheels, this is exclusively for the use of ban on motorcycles. But a difference tread tires front and rear tire is not absolute, as there are several brands of tires are manufactured with the same tread shape between front and rear wheels.
Tires must have a strong frame and hold it will be resistant to high pressure, surprises and changes of load of the vehicle. Order ban is called a carcass made of layers of nylon. Nylon layer construction usually made crisscrossed crossed. Then the carcass is coated rubber resistant to heat caused by friction tread with the road surface. The large number of layers of nylon is typically noted on the outside of the tires in question. Then in order for the ban to be strong and stable on the tires rims are then equipped with a bead made of strong wire and rubber coated hard enough.
Type of tires there are equipped with inner tube and there are also tires which do not require tubes commonly referred to with the term tubeless tires. Specific to tires made of rubber in the pure power and has a high elastic and resistant to heat.
Wind pressure or tightening the tires must comply with the tire size and usage; this will affect the control of the vehicle when the vehicle is travelling. If tires are too hard or too high air pressure will usually speed up the tire wear and will cause the middle part fast tires bald and easy vehicle skid. Conversely, if the tire is too soft or the air pressure is too low, in addition to the wear that occurs on the side of the tread, but also will cause excessive heat in the tires rubbing against her due to tread with the road surface.