How to Safely Uninstall Plug Gasket Motor

The work of unloading plug gasket motor is not an easy job. Not everyone can do it and understand how. Here is how too easily and safely uninstall-install gasket your motorcycle :

1. be careful when removing the gasket, do not open gasket by means of forced marriages because it could lead to media in the gasket is damaged. For example for example lip cylinder cuts because the gasket removed by using a screwdriver sharp plates so that it will cost more. For more secure can be opened by using a thin knife or scrap or it could be using a cutter. It would be great if you use special spray reliever gaskets.


2. If necessary use of alcohol which is useful in addition to glue Flex but can also remove the remaining glue is already hardened. After the gasket off and clean, take a ruler and place the iron crosses on the top of the component in the gasket.


3. Flatten the gasket, if there is a part that is not symmetrical with a ruler, it means that there is uneven. So that the gasket is smooth again then it should be sanded, so try sticking the gasket properly.


4. Notice when installing the new gasket, clean first the other dust and dirt that sticks out of the hand. The goal is to make the condition of the gaskets are not contaminated with impurities that can cause hand durability gaskets so reduced.


5. Please use a special gasket sealer, actually not recommended but as long as do not irrigated component in the fuel it is still allowed. We recommend that you use a special sealer for gasket or aerosol adhesive.